News
Latest Updates and Industry Insights at Wooster Hydrostatics
Hydraulic System Maintenance for Heavy Equipment: A Practical Preventive Maintenance Guide
Good hydraulic system maintenance runs on a fixed schedule. Check oil level, oil temperature and visible leaks every day. Inspect hoses, seals and breathers every week. Sample the oil and test relief valve settings every month. Most failures start with dirty oil wearing internal parts, so the oil gets the
How to Diagnose Hydraulic System Pressure Loss: Causes, Testing, and Repair
Hydraulic pressure loss usually comes from a worn pump, contaminated or aerated oil, an internal leak past a seal or valve, or a relief valve set too low. Check the oil, filters and reservoir first. Then put gauges at several points in the circuit to find where the pressure drops
Hydraulic Cylinder Repair: Common Failure Signs and When to Rebuild or Replace
Most hydraulic cylinder repair jobs trace back to worn seals, a scored rod or barrel, or side-loading from off-center work. Seal wear and light scoring are repairable. Rebuild when the barrel, rod and end caps are structurally sound. Replace the cylinder when the barrel is cracked, bent or scored too
Hydraulic Motor Repair vs. Replacement: How to Choose the Right Option
Hydraulic motor repair is the right call when the housing is sound and the wear sits on internal parts such as bearings and the rotating group. Hydraulic motor replacement is the right call when the housing is cracked or the failure has pushed metal debris through the rest of the
Hydraulic Repair for Manufacturing Equipment: How to Reduce Downtime and Protect Production
The invoice is almost never the expensive part of a hydraulic failure. A pump rebuild on a machine that feeds three downstream cells costs you the rebuild plus every hour those cells sit idle, and the second number usually dwarfs the first. So hydraulic repair for manufacturing equipment is a
LHY Powertrain Pump Repair: When to Repair, Rebuild, or Replace
Repair an LHY Powertrain unit when one component has failed and the rest of the pump is clean. Rebuild it when the hours are high or metal has gone through the circuit. Replace it only when the housing is damaged beyond machining or the model no longer exists in any